Kenwood TS-930S Instruction Manual page 6

large, heavy, flywheel-type knob is used for ease of tun-
ing. The T.F. Set switch allows fast transmit frequency
setting for split-frequency operations. An A=B switch
is provided for equalizing one VFO frequency to the
other. A VFO "'Lock'' switch is provided. The RIT
control allows + 9.9 kHz receive frequency shift.
Automatic VFO Step change
Tuning faster than 5.5~6.5 revolutions/second
increases the tuning rate for easy QSY.
Eight Memory Channels
These store both frequency and band. VFO-MEMO
switch allows use of each memory as either an indepen-
dent VFO, (the original memory frequency can be recall-
ed at will), or as a fixed frequency. Internal battery
memory back-up, estimated 1 year life. (Three ''AA'"'
batteries not Kenwood supplied).
Fluorescent Tube Digital Display
Six digit fluorescent tube digital display has an analog
type sub-scale with 20 kHz increment markers. A
separate 2 digit display always indicates RIT frequency
shift. The display also indicates VFO ''A'' or ''B",
Memory channel operation, RIT "''ON'' and VFO
"LOCK".
AC Power Supply Built-in
120, 220, or 240 V AC, switch selected. (operates on
AC only). Separate automatic fan provided to force-cool
the power supply.
Other Features:
¢ SSB monitor circuit, 3 step RF attenuator, VOX, and
100 kHz marker
e 2.4 kHz SSB and 6 kHz AM filters built-in
¢ Display and meter dimmer switch
Optional Equipment:
e AT-930 Automatic antenna tuner
e SP-930 External speaker with selectable audio
filters ,
¢ YG-455C-1 (500 Hz) or YG-455CN-1 (250 Hz) plug-
in 455 kHz CW filters
* YK-88C-1 (500 Hz) CW and/or YK-88A-1 (6 kHz)
AM plug-in 8.83 MHz filters
° MC-60A Deiuxe desk microphone with PTT, PTT
lock, and UP/DOWN switches
© TL-922(A) The linear amplifier TL-922A (without
10m band) is available only in U.S.A.
¢ SM-220 Station monitor for transmit, receive, and
trapazoid displays
© PC-1A Hybrid phone patch
¢ HC-10 Digital World Clock
° HS-6, HS-5, (Deluxe through standard) headphones
HS-4,
IMPORTANT
The MC-60A has a built-in amplifier. When using the
microphone connected to the TS-930S, be sure to
set the MC-60A MIC AMP switch to OUT.
With the MIC AMP switch set to IN, the microphone
output level exceeds the rated input level of the
TS-930S.