Manually Install Channels - Philips 32PFL7674H Manual

Access DVB-C and DVB-T channel
networks
This option appears only if your country
supports DVB-C (Digital Video Broadcasting-
Cable). If you have installed both DVB-C and
DVB-T channels, you have to switch to the
respective network to watch channels on that
network.
1
When watching TV, press
» The home menu appears.
2
Press the Navigation buttons to select
[Setup].
[Setup] menu appears.
The
»
3
Press the Navigation buttons to select
[Installation] > [Channel installation] >
[Antenna or Cable DVB] > [Antenna] or
[Cable].
[Antenna] to access DVB-
• Select
T (Digital Video Broadcasting-
Terrestrial) channels.
• Select [Cable] to access DVB-C
(Digital Video Broadcasting-Cable)
channels.
4
Press OK to confirm your choice.
5
Press BACK to exit.
The TV switches to the selected
»
network.

Manually install channels

This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
•
1
2
3
(Home).
4
5
6
Step 2 Search and store new TV
channels
1
2
Note
Skip this step if your system settings are
correct.
When watching TV, press
The home menu appears.
»
Press the Navigation buttons to select
[Setup].
The [Setup] menu appears.
»
Press the Navigation buttons to select
[Installation] > [Channel installation]
> [Analogue: Manual installation] >
[System].
Press OK.
A list of regional systems appears.
»
Press the Navigation buttons to select
your country or region.
Press OK to confirm your choice.
The selected country or region is
»
applied.
In the [Analogue: Manual installation]
menu, press the Navigation buttons to
select [Find channel].
Press OK.
[Find channel] menu appears.
The
»
5
Done 3 8 . 0 0
(Home).
Search next
MHz
EN
37