Install Channels; Automatically Install Channels - Philips 32PFL7674H Manual

6 Install channels

The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.

Automatically install channels

This section describes how to search and store
channels automatically.
Install channels
Your TV searches and stores all available
digital and analogue TV channels as well as all
available digital radio channels.
1
In the [Channel installation] menu,
press the Navigation buttons to select
[Automatic installation].
2
Press OK.
» A message appears prompting you to
start channel installation.
3
Press the Navigation buttons to select
[Start].
4
Press OK.
The channel update screen appears,
»
with [Re-install channels] selected.
EN
36
Re-install channels
Select Update channels els
to update your current t
channel list. Select Re- e- Update channels
install channels to search arch
and store all channels
again.
Caution
• [Settings] unchanged unless your
Leave
DVB-C provider supplies values for [Network
frequency], [Network ID] or [Symbol rate].
•
[Frequency scan] to [Full scan] can
Setting
extend installation time significantly.
Note
•
If you have access to DVB-T and DVB-C, and
want to view channels from both networks,
you must perform channel installation twice
— once for DVB-T and once for DVB-C.
Select [Antenna] to install DVB-T channels and
select [Cable] to install DVB-C channels.
•
To switch between DVB-T and DVB-C
channels (see 'Access DVB-C and DVB-T
channel networks' on page 37).
5
Press OK.
Follow the onscreen instructions to
»
complete channel installation. When
channel installation is complete,
[Done] is selected and a list of installed
channels appears.
6
Press OK to confirm your choice.
The TV exits to the
»
installation] menu.
Tip
•
When digital TV channels are found, the list of
installed channels may display empty channel
numbers. You can rename, reorder or uninstall
stored channels as described below.
[Channel