Asus PRIME H370M-PLUS User Manual page 13

Intel LGA1151 CPU socket
®
Install Intel LGA1151 CPU into this surface mount LGA1151 socket, which is
®
designed for 8th Generation Intel
processors.
For more details, refer to 1.3 Central Processing Unit (CPU).
CPU, chassis, and AIO pump fan
connectors (4-pin CPU_FAN, 4-pin
CHA_FAN1~2, 4-pin AIO_PUMP FAN)
Connect the fan cables to the fan
connectors on the motherboard,
ensuring that the black wire of each
cable matches the ground pin of the
connector.
DDR4 DIMM slots
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these
DIMM sockets.
For more details, refer to 1.4 System memory.
Intel H370 Serial ATA 6.0Gb/s connectors (7-pin
®
SATA6G_1-6)
These connectors connect to Serial ATA 6.0 Gb/s hard
disk drives via Serial ATA 6.0 Gb/s signal cables.
USB 3.1 Gen 1 connector (20-1 pin U31G1_56)
Connect a USB 3.0 module to any of these connectors
for additional USB 3.0 front or rear panel ports. These
connectors comply with USB 3.0 specifications and
provides faster data transfer speeds of up to 5 Gbps,
faster charging time for USB-chargeable devices,
optimized power efficiency, and backward compatibility
with USB 2.0
ASUS PRIME H370M-PLUS
Core™ i7 / i5 / i3, Pentium
®
CPU_FAN
CHA_FAN1
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
, and Celeron
® ®
AIO_PUMP FAN
CHA_FAN2
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
SATA6G
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
U31G1_56
PIN 1
USB3+5V
USB3+5V IntA_P1_SSRX-
IntA_P2_SSRX- IntA_P1_SSRX+
IntA_P2_SSRX+ GND
GND IntA_P1_SSTX-
IntA_P2_SSTX- IntA_P1_SSTX+
IntA_P2_SSTX+ GND
GND IntA_P1_D-
IntA_P2_D- IntA_P1_D+
IntA_P2_D+ GND
1-3