Escape From Mud - Komatsu GALEO PC40MR-2 Operation & Maintenance Manual

OPERATION
MACHINE OPERATIONS AND CONTROLS

ESCAPE FROM MUD

Always operate carefully to avoid getting affixed in mud. If the machine does get affixed in mud, do as follows to get
the machine out.
Stuck One Side of Track
NOTICE
When using the boom or arm to raise the machine, always have the bottom
of the bucket in contact with the ground. (Never push with the teeth.) The
angle between the boom and arm should be 90° to 110°.
When only one side is affixed in mud, use the bucket to raise the
track, then lay boards or logs and drive the machine out.
Stuck Both Sides of Tracks
If the track on both sides are in mud and the machine slips and
cannot move, use the procedure given above to lay logs or timber.
dig the bucket into the ground at the front, operate the arm in the
same way as when digging, and set the travel lever to FORWARD
to pull the machine out.
3 - 77