Table of Contents
Advertisement
Connections
EXT 1
EXT 2
EXT 3
HDMI 1
HDMI 2
HDMI 3
Side
2
Press
to enter the list.
3
Press
or
to select a connector.
4
Press
to enter the list.
5
Press
or
to select the device attached
to the connector.
6
Press OK to select the device.
7
Repeat the procedure until all devices are
correctly assigned to connectors.
8
Press MENU to exit.
Adding the AUDIO-IN mini-jack
connector
If you connect audio from a PC to the AUDIO
IN mini-jack connector at the back of the TV,
you must associate it to the HDMI connector.
1
Press MENU on the remote control
and select [TV menu] > [Installation] >
[Connections] > [Audio In L/R] .
EXT 1
None
DVD
Blu-ray
HDD/DVDR
HD rec.
Game
VCR
Connections
AUDIO IN L/R
...
EXT 3
HDMI 1
HDMI 2
HDMI 3
Side
AUDIO IN L/R
2
Press
to enter the list.
3
Press
or
to select the HDMI
connector used by the PC.
4
Press MENU to exit.
Assign a channel decoder
Decoders that decode digital channels can be
connected to EXT 1 or EXT 2 (SCART). You
have to assign the TV channel as a channel to
be decoded. Then assign the connection where
the decoder is connected.
1
Press MENU on the remote control
and select [TV menu] > [Installation] >
[Decoder] > [Channel] .
2
Press
to enter the list.
3
Press or
to select the channel to
decode.
4
and go back to select [Status] .
Press
5
Press
or
to select the connector used
by the decoder.
6
Press MENU to exit.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices. Compliant
devices must be connected to your TV via
HDMI and assigned.
None
HDMI 1
HDMI 2
HDMI 3
EN
45
Advertisement
Table of Contents
