Initial Setup; Wall Mounting - ViewSonic VG2248 H2 User Manual

Initial Setup

This section provides detailed instructions for setting up your monitor.

Wall Mounting

NTTE For use only with a UL Listed Wall Mount Bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer. Refer to the instructions that come with the base mounting
kit.
Refer to the table below for the standard dimensions for wall mount kits.
Maximum Hole pattern
Loading (W x H)
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5mm
NTTE Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface, with the screen facing down.
3. Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
4. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
Interface Pad
(W x H x D)
100 mm
9
Pad Hole Screw Specification &
M4 x 10mm
Quantity
4 pieces