Table of Contents
Advertisement
Available languages
Available languages
Fig. M
11
26
13
3. Align the left bracket shelf hole
31
bracket hole
. Slide the M5 washer onto the M5 bracket
screw. Slide the M5 bracket screw through both holes.
Fasten the M5 serrated flange lock nut onto the M5 bracket
screw with the hex key and box wrench.
Fig. N
13
4. Align the left bracket leg hole
bracket hole. Slide the M5 washer onto the M5 bracket
screw. Slide the M5 bracket screw through both holes.
Fasten the M5 bracket screw with the hex key.
Fig. O
28
32
Final Tightening
Fully tighten all nuts and screws throughout the stand to
ensure stability.
Use
Casters (Fig. P)
5
•
To lock the caster
, press the end of the caster lock
down as shown in Fig. P.
•
To unlock the caster, pull the end of the caster lock up.
27 27
30
with the middle shelf left
7
17
31
30
11
26
32
with the adjustable leg
11
26
13
33
Fig. P
28
33
Sliding Shelf (Fig. Q)
For extra shelf space, pull the sliding shelf
of the middle shelf
Fig. Q
Placing Pizza Oven on Top
(Pizza Oven Sold Separately) (Fig. R)
WARNING: Lock the casters before placing the pizza
oven on the stand as it could move during placement
and cause injury or misalignment.
To place the pizza oven
1. Unfold the pizza oven legs
and away from the pizza oven.
2. Place the pizza oven on top of the stand, making sure the
pizza oven legs are lined up with the stand pockets
Locked position
Unlocked position
34
18
.
36
on top of the stand:
37
by pulling them down
ENglIsh
out of the side
34
18
35
.
7
Advertisement
Table of Contents
