Table of Contents
Advertisement
Available languages
Available languages
[] Switching
Audio
Mode
[] Sleep Timer
Thissection describes h owto switchtheaudioin the analogmodeandhow
Thesleeptimer canbeset toautomatically turnoffthe unit afteran
to switch the audiolanguagein thedigitalmode.
incremental p eriodoftime.
While receiving an MTS broadcast, press [AUDIO.h]
repeatedly
to cycle through
the available
audio channel.
AUDIO
MAIN
SAP
MONO
: Outputs
main-audio
: Outputs
second audio program
: Outputs
mono-audio
• The information
display will automatically
disappear
in a few seconds.
Press [AUDIO J_]to display the currently
selected
language
and the number
of available
languages.
AUDIO
2
Press [AUDIO J_]repeatedly
to cycle through
the
available
audio languages.
AUDIO
• Available
languages
differ depending
on the
broadcast. "OTHER" is displayed
when the audio
language
cannot be acquired,
or the acquired
languages
are other than English, Spanish or French.
• The information
display will automatically
disappear
in a few seconds.
Note:.
Pressing [AUDIO .h] does not control external audio devices.
1
Press [SLEEP __3]to set the sleep timer.
SLEEP
SLEEP OFF
• Sleep timer
display appears
on the TV screen.
2
Press [SLEEP _)] repeatedly
to change
the amount
of
time until shut off.
SLEEP
SLEEP 120MIN.
• You can set your unit to turn off after a set period
of
time (from 30 to 120 minutes).
• Each press of [SLEEP _',)] will increase the time by 30
minutes.
• After set up, the sleep timer display can be called up
for checking
by pressing
[SLEEP _D].
To Cancel the Sleep Timer
Press [SLEEP _]
repeatedly
until "SLEEP OFF" is
displayed
on the TV screen.
Note:
• The sleep timer setting display will automatically disappear
in a few seconds.
• When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
EN
Advertisement
Table of Contents
