Kvm Function - AOC AGON PD49 User Manual

KVM function

What is KVM?
With KVM function, you can show two PCs, or two notebooks, or one PC and one notebook on one AOC monitor and control the two
devices with one set of keyboard and mouse. Switch your control over your PC or notebook devices by choosing input signal source on
"Input Select" of OSD menu.
How to use KVM?
Step 1: Please connect one device (PC or notebook) to monitor via USB C.
Step 2: Please connect the other device to monitor via HDMI or DisplayPort. Then please also connect this device to monitor with USB
upstream.
Step 3: Please connect your peripherals (keyboard and mouse) to monitor via USB port.
Device 1
Note: Display design may differ from that illustrated
Step 4: Enter to OSD menu. Go to OSD Setup page and select "Auto", "USB C", or "USB UP" of USB Selection tab.
OSD Setup
Language English
Timeout
H. Position
Transparence
Break Reminder
USB
USB Selection
USB Selection
Auto
USB C
USB Up
USB UP
10
100
25
O
O
Auto
Function Description
Auto selects USB C or USB Up depending on the input source.
Provides USB Hub function through Type-C cable.
Provides USB Hub function through USB B cable.
USB-C
USB USB
16
Device 2