Table of Contents
Advertisement
Editing a Cooking Profile
To edit a cooking profile, the oven must be in the
cooking mode and the full edit or flex option must
be enabled for each option to be edited. For more
information on selecting between full edit, rigid,
and flex options for each editable setting, see Edit
Options Screen on page 16.
When the rigid option is enabled for a given setting,
the soft key adjacent to that setting (Figure 14) is
disabled and no menu editing is allowed.
When the full edit option is enabled for a given
setting, that setting is fully customizable and chang-
es are saved once the oven returns to the oven off
or cooling down mode.
When the flex option is enabled for a given setting,
that setting is customizable within flex option
limitations (as described in the following sections),
and changes will reset when the oven returns to the
oven off or cooling down mode.
NOTE: The flex option does not apply to editing a
profile name.
This section assumes that the full edit option is
enabled (except where otherwise noted) and that a
cooking profile and belt speed have been selected.
L1
PROFILE 1
COOKING
BELT F
L2
5:00
BELT R
L3
3:20
Figure 14: Cooking Screen
Changing a Cooking Profile Name
1. From the cooking screen (Figure 14), touch
L1 to access the name change screen
(Figure 15).
2. Change the name of the cooking profile.
- The up key moves up through the available
- The down key moves down through the
- INS (L1) inserts a space.
- DEL (R1) deletes the selected character.
- ---> (R1) moves the cursor to the right.
- <--- (L1) moves the cursor to the left.
3. Touch save (R3) to save the changes or
cancel (L3) to cancel any changes.
R1
TOP AIR 80 %
SET
R2
475F
R3
BTM AIR 100 %
Figure 15: Name Change Screen
characters. e.g. A,B,C...
available characters e.g. A,+,-, ,9,8...
L1
INS
L2
<---
[PROFILE 1
L3
CANCEL
HCT- 4201 / Rev S / January 2024
29
R1
DEL
R2
--->
]
R3
SAVE
Advertisement
Table of Contents
