Range; Accessories; Compliance; Machine Identification - Trane LIFT 81-P Installation Operation & Maintenance

Water-cooled heat pumps with scroll compressors for hot water production at very high temperatures heating capacity 37-550 kw
Table of Contents

Advertisement

1.2.1
Symbols
This publication contains the following symbols:
Danger
Draws attention to actions that can cause serious
injury if not performed correctly.
Prohibited
Draws attention to actions that impose a
prohibition.
1.3

Range

LIFT 81-P
LIFT 91-P
LIFT 101-P
LIFT 131-P
LIFT 151-P
LIFT 162-P
LIFT 182-P
LIFT 202-P
LIFT 262-P
LIFT 302-P
LIFT 402-P
LIFT 522-P
LIFT 602-P
LIFT 804-P
LIFT 1044-P
LIFT 1204-P
Refrigerants legend
• /Y = R134a
• /J = R513A
1.3.1
Available versions
LIFT
Heat Pump
1.4

Accessories

Factory fitted accessories
IM
Automatic circuit breakers
SL
Unit silencement
Cooling circuit shut-off valve on discharge line
RFM
RFL
Cooling circuit shut-off valve on liquid line
PV3E
3-Way electronic pressostatic valve for evaporation control
PV3C
3-Way electronic pressostatic valve for cold start
FI
Antifreeze heater for evaporator and condenser
SS Soft start
IS
Modbus RTU protocol, RS485 serial interface
IST
Modbus TCP/IP protocol, Ethernet port
BACnet MSTP protocol, RS485 serial interface
ISB
BACnet TCP/IP protocol, Ethernet port
ISBT
LonWorks protocol, FTT-10 serial interface
ISL
ISS
SNMP protocol, Ethernet port
IAV
Remote set-point, 0-10 V signal
IAA
Remote set-point, 4-20 mA signal
Remote signal for second set-point activation
IAS
IDL
Demand limit from digital input
0-10 V signal for the management of the 3-Way electronic
IVE
pressostatic valve for evaporation control
0-10 V signal for the management of the 3-Way electronic
IVC
pressostatic valve for cold start
Loose accessories
High and low pressure gauges
MN
Remote control panel
CR
AG
Rubber shock absorbers
AM
Spring shock absorbers
1.5

Compliance

The device complies with the following standards:
Machinery Directive 2006/42/CE
PED Directive 2014/68/EU
Electromagnetic Compatibility Directive 2014/30/UE
LVD Directive: 2014/35/UE
1.6

Machine identification

A
Packaging plate
A
Packaging plate
Frame feature plate
B
Electrical board feature plate
C
1 | General
5

Advertisement

Table of Contents
loading

Table of Contents