M.2 solid-state drive under the keyboard
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 27.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the bottom door. See "Bottom door" on page 28.
5. Remove the keyboard. See "Keyboard" on page 29.
6. Remove the service bracket. See "Service bracket" on page 33.
Removal procedure
Memory module
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
36
P15 Gen 2/T15g Gen 2/P17 Gen 2 User Guide
and print the following instructions.