Table of Contents
Advertisement
4.6.6
System Configuration
On the system configuration page, you can configure the basic information of the NVR, set the
system time, manage the login users and configure the live view parameters.
Basic Configuration
Overview
Navigate to Configuration > System > Basics.
You can configure the basic parameters of the NVR here, such as device name, language, output
resolution, and lock screen password.
Parameter description
Parameter
Device Name
Language
Output Resolution
Lock Screen Password
Description
Specifies the name of the NVR. You can modify it as required.
Specifies the language displayed on the GUI. You can modify it as required.
Specifies the output resolution of the NVR. The resolution of different monitors
is different. You can modify it according to the actual situation.
Specifies whether to enable the Lock Screen Password function.
-
Enable: The default status. After you enter the GUI of the NVR, if there is
no operation within the
modify it as required), the system will automatically log out and return to
the Live View page. If you want to enter the GUI, you need to log in again.
-
Disable: It is not restricted by "Need to log in again when the page is idle
for a timeout" unless you log out or reboot the NVR.
Only administrator account admin is supported.
Lock Screen Time
155
Document Version: V1.3
(default: 5 minutes, you can
Advertisement
Table of Contents
