Kenwood DPX-400 Instruction Manual page 29

Double din sized cd/cassette receiver
Hide thumbs Also See for DPX-400:
Table of Contents

Advertisement

You can switch the clock display on or off during the ALL OFF
'Switching the Clock Display On/ Off during the ALL OFF mode:
Each time you press the DISP button, the clock display
switches on or off
(wore)
+ The clock will not be displayed when the power of this unit is
off nor when the vehicle ignition is off
+ The @ indicator lights while the clock is displayed.
'Adjust
the time
1 When the time is not displayed, first press the DISP button to
display the time,
2 While holding down the DISP button, press the Ke or mt
buttons to adjust the time.
The me button adjusts the minutes and the te button adjusts.
the hour,
Setting the minutes to "00":
While holding down the DISP button, press the FM button to
set the minutes to "00".
Pressing these buttons while the minute is below "30" rounds
it off, and while the minute is "30" or more rounds it up.
Dimmer
l e v e l
adjus
You can adjust the Dimmer level of the unit
'when your car's light switch has been turned on or
(rors)
The dimmer function is not
connected
To adjust the Dimmer level:
1 Press the SAC button repeatedly and switch the display to
ALL OFF to enter the ALL OFF mode.
2 Press the MENU button for at least one second
"Function Set" is displayed and the menu mode is turned on.
3 Keep pressing the me button until the Dimmer level
adjustment function appears in the display.
Press the laa button to search in the other direction.
The function setting i indicated by 'DIM STEP # in the
display, indicating that the Dimmer level adjustment mode is
lable if the dimmer wire is not
'Switching settings
Press either the AM or FM button.
Press the FM button to change the setting values higher,
and press the AM button to
change them lower. Settings
may be made from 1 to 5
5 Press the MENU button to end the menu mode,
(hore)
The °#" display in the Dimmer level adjustment mode will ditter
depending on the setting, The intial setting value is °3"

Advertisement

Table of Contents
loading

Table of Contents