NEC PC-8000 Series User Manual page 61

(d) If an error occurs in setting the horizontal
tabulation, all the horizontal tab positions
previously set are cleared.
(el This code is ignored in the proportionally
spaced printing mode.
(f)
I t .
P and
4
are
deaned
by 3-digit decimal
numbers (n2) (nl) and (nO), respectively.
(19) ESC, ) (lB, 29)H
(a) When this code is input, the horizontal tab
positions are cleared.
(b) The clearing method is described as below.
ESC
~0D0 [J
Clears
a
and
p
horizontal tab positions.
Other set positions remain unchanged.
(20) ESC,
2 (lB, 32)H
(a) When this code is input,
aU
the horizontal tab
positions are cleared.
(21)
ESC, X
(lB,
58)H
(a) When this code is input, an underline is printed
at the 9th dot position [rom the following
character.
(22)
ESC, Y
(lB,
59)H
(a) When this code is input, underline printing at
the 9th dot position is stopped.
(23)
ESC,
a to d (IB, 61 to 64)H
(a) When the printer select mode is valid (DIP
swiJ.ch
SW2·2
is ON).
When this code is input with the select switch
turned on or after receiving the DCl code, the
device of the specified number is selected.
-50-
I
i
I
I
•
•
•
•
•
•
. .
•
•
. .
•
•
I I
I I ,
•