NEC PC-8000 Series User Manual page 20

. .
. .
. .
. .
• •
•
• •
• •
•
• •
•
• •
•
•
••
and the printer is placed in the deselected state. In this
state the prinler performs neither data reception nor
printing.
(2) Interlock switch
When the carrier cover is opened, the printer detects
this (act and automatically enters the deselected state .
To resume the printing operation, depress tlle select
switch after closing the carrier cover.
5.5 Paper Loading
When the PE indicator illuminates, remove the paper
cover, pull the paper cutter forward and pull the roller
shaft forward from its center. Pull the release lever forward
to
its limit
and remove the remaining paper by pulling it
upward while turning the platen knob clockwise.
Fig. 6. Paper Unloading
Then, load the new paper by following the procedures
described below.
(1) Fanfold paper:
Raise the paper holders located at each of the two
sprocket tractors .