Table of Contents
Advertisement
Cleaning
en
Remove all fluff from the seals on
7.
the dryer and on the heat exchanger.
Allow all the water to drip off.
8.
First insert the heat exchanger,
9.
and then fit the heat exchanger's top
cap in place.
Turn both locking levers back and
10.
close the maintenance flap until it
locks into place.
Close the maintenance flap and
11.
press on it until you feel it click in
place.
22
Cleaning the moisture sensor
The dryer is equipped with a
Note:
stainless-steel moisture sensor.
The moisture sensor measures how
damp the laundry is.
After long periods of use, a fine layer of
limescale can form on the moisture
sensors. This must be removed
regularly.
Open the door and clean the moisture
sensor with a rough sponge.
Caution!
The moisture sensor may be damaged.
Do not clean the moisture sensor with
steel wool and abrasive materials.
Advertisement
Table of Contents
