Table of Contents
Advertisement
Suitable types of heating
You can switch on steam assistance for these types of
heating:
4D hot air <
■
Top/bottom heating %
■
Hot air grilling 7
■
Keeping warm O
■
Starting
Fill the water tank.
1.
Set the type of heating and temperature.
2.
Touch the "Added steam" text field.
3.
In the display, the steam level is displayed in white
and in focus.
Turn the rotary selector to set the steam level.
4.
Press the l Start/Stop button to start.
5.
The appliance begins to heat up.
If the water tank runs dry during an operation with
Note:
steam assistance, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Changing and cancelling
To change the steam level, touch the "Steam level" text
field. The steam level is highlighted, and can be
changed using the rotary selector. The change is
adopted immediately.
If you want to cancel steam assistance, reset the
"Added steam" to "0".
The operation continues without adding steam.
Note:
Reheating
With the "Reheating U" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
If the water tank runs dry during the operation
Note:
with the Reheating setting, the operation is interrupted.
Fill the water tank.
Starting
Fill the water tank.
1.
Touch the Menu field.
2.
The options for selecting an operating mode are
displayed.
Touch the "Steaming" text field.
3.
Touch the "Reheating" text field.
4.
The temperature is in focus.
Set the temperature using the rotary selector.
5.
Touch the "Duration" text field and set the duration.
6.
A duration is always required for the steam
Note:
types of heating.
Press the l Start/Stop button to start.
7.
The appliance begins to heat up.
Once the duration has elapsed, an audible signal
sounds. The appliance stops heating. The duration 00
m 00 s is shown in the display.
When your dish is ready, switch off the appliance using
the ÿ On/Off button.
Changing
You can change the settings as usual.
To change the temperature or the duration, touch the
corresponding text field and change using the rotary
selector. The change is adopted immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving T" type of heating than at room
temperature and does not dry out.
Use the information in the tables to select the
appropriate setting. ~ "Tested for you in our cooking
studio" on page 47
If the water tank runs dry during the operation
Note:
with the Dough proving setting, the operation is
interrupted. Fill the water tank.
Starting
Fill the water tank.
1.
Only switch on the Dough proving setting
Note:
once the cooking compartment has completely
cooled down (to room temperature).
Touch the Menu field.
2.
Touch the "Steaming" text field.
3.
Touch the "Dough proving" text field.
4.
The temperature is in focus.
Set the temperature using the rotary selector.
5.
Touch the "Duration" text field and set the duration.
6.
A duration is always required for the steam
Note:
types of heating.
Press the l Start/Stop button to start.
7.
The appliance begins to heat up.
Once the duration has elapsed, an audible signal
sounds. The appliance stops heating. The duration 00
m 00 s is shown in the display.
When your dish is ready, switch off the appliance using
the ÿ On/Off button.
Changing
You can change the settings as usual.
To change the temperature or the duration, touch the
corresponding text field and change using the rotary
selector. The change is adopted immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button.
Filling the water tank
The water tank is located behind the control panel.
Before starting an operation with steam, open the
control panel and fill the water tank with water.
Make sure that you have set the water hardness range
correctly. ~ "Basic settings" on page 30
Steam
en
23
Advertisement
Table of Contents
