Power Supply; Power Fuse - Pyramid ARCTIC Series Owner's Manual

FUNCTIONS PB-301/PB-601
8.
10.
11.
12.
POWER SUPPLY
A. +12V
To connect + 12V DC power supply wire from the terminal of the battery.
B. GROUND
To connect the ground wire from the chassis of the automobile.
C. REMOTE
To connect the control wire which provides remote turn on and off of the
amplifier by the radio/cassette player. (Usually The Auto Antenna Lead)
. POWER FUSE
The power fuse protects both this amplifier and the automobile electrical system
from short circuit conditions.
SPEAKER TERMINALS.
The speaker terminals are 14K Gold Plated for high conductivity and minimum
impedance loss. The terminals are facing upwards for easy wiring in tight situa-
tions. Be sure to strip just enough insulation off your speaker wires that will
fit under the screw plate to help ensure against speaker wire short circuits.
TRI-MODE BRIDGING CAPABILITY. (PB-601)
The Amplifier can be bridged into the following systems.
A. Three channel Mode. Bridge Channels 3 & 4 into one high power channel
for subwoofer application while leaving channels 1 & 2 in the stereo mode-
for satellite components.
B. Two Channel Mode. Bridge channels 1 & 2 into one high powered channel.
Bridge channels 3 & 4 into a second high powered channel. Be sure to utilize
speakers which can handle at least 100 Watts RMS on the bridged channels.
MUTE TURN ON CIRCUIT
The Amplifier features an anti-thump delay circuit. This circuit eliminates irritating
thump noises some times experienced with cheaper amplifiers when they are
turned on.
13