Advertisement
Available languages
Available languages
\System connection
RCA cable ground lead
terminal
When using an RCA cable
with a ground lead
attached, connect the
ground lead to this terminal.
I ACAUTIOW I
Do not connect cables and leads to both RCA cable input jacks and
the speaker input terminals simultaneously, for this may cause
malfunction or damage.
Left output (White)
Right output (Red)
r^AUTION I
Do not .use this terminal for
r.
power source grounding.
=^1==
This unit will be damaged if
^—j
the power source
if
^
grounding wire is
1
connected to this terminal,
v
Battery terminal
Ground terminal
/y
Power control terminal
/
Power terminal
Pass battery and ground cables through
supplied terminal cover and connect to
respective terminals. After completing
connections, fasten terminal cover over
terminal bracket.
Lead terminal
(Commercially available part^
.
^^TerminaJ cover
CENTER UNIT
(Casstte receiver,
Graphic equalizer etcj
Power control lead
(Commercially
available part]
J[ KENWOOD
1^1 RightXX
uj speaker\^\^^^
( I_=rf1
Left
\\
'-kj speaker
\
Terminal cover
Speaker output terminal
Connect the speaker output cables
to these terminals.
Speaker terminal
polarity
Le L0 Re R©
Battery cable
/Power control
cable
'Ground cable
Lead terminal
tODmmercieliy available
part)
■Speaker output cable
If a buzzing noise is heard from the speakers when, the
engine is running, connect a line noise filter (optional) to
each of the battery cable.
I AWARNING
To prevent fire caused by a short in the. wiring, connect a fusible link or
breaker nearby the battery's positive terminal.
Battery
Connect the ground cable to a metal part of the car chassis that acts as an electrical
ground passing electricity to the battery's negative 0 terminal, Do not turn the power on if
the ground cable is not connected.
6 English
Advertisement
