Table of Contents
Advertisement
LASER SAFETY
This unit employs a laser. Due to possible eye
injury, only a qualified service person should
remove the cover or attempt to service this
device.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
LASER
Type
Wave length
Output Power
Beam divergence
Manufactured under license from Dolby
Laboratories. "Dolby"and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential unpublished
works. © 1992-1997 Dolby laboratories.
All rights reserved.
TruSurround and the SRS symbol are
trademarks pf SRS Labs., Inc.
TruSurround technology is manufactured
under license from SRS Labs., Inc.
• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– a bright white line is displayed across the screen.
– cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• Do not place your TV set under direct sunlight or heat.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
• Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
• Never attempt to repair a defective TV yourself. Always consult a skilled service personnel.
L
ASER
Semiconductor laser GaAIAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degree
TV S
AFETY
S
AFETY
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
The TV-DVD Combi player is
in conformity with the EMC
directive and low-voltage directive.
CAUTION – VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
CAUTION WARNING LABEL IS
LOCATED ON THE BACKCOVER
OF THE SET.
The region code for this set is 3.
Since it is usual for DVD movies to be
released at different times in different
regions of the world, all players have
region codes and disc can have an
optional region code. If you load a disc
of a different region code to your
player, you will see the region code
notice on the screen. The disc will not
play and should be unloaded.
LASER PRODUCT
2
CLASS 1
3
Advertisement
Table of Contents
