Pioneer LaserDisc CLD-1090 Operating Instructions Manual page 13

SYSTEM REMOTE CONTROL CONNECTION
WHEN COMBINED WITH OPTIONAL PIONEER NOTE:
PROJECTION
MONITOR
(or COMPONENT
When system controi connections have been made,
DISPLAY)
the player cannot be directly controlled by the remote
Connect the VIDEO OUT jack of the player to the video
control unit. To operate the player, aim the remote
input jack of the projection
monitor (or component
contro! unit at the projection monitor for component
display), and connect the AUDIO OUT jacks of the player
display).
System Control
By connecting the CONTROL IN jack of the player to the
remote jack of the projection
monitor
{or component
display), the system
can be controlled by the remote
control unit of the player at the remote control sensor of
the projection monitor (or component display).
the connection.
Audio cord
Stereo amplifier
Commercially available
cord with mini-plugs
Video cord
Audio cord
13
<VRB1048>