Advertisement
KL-M504BK
XL-M505TN
HOW TO OPERATE
Point the remote control unit towards
the remote sensor on the front panel of
the CD player-changer, always operating
it steadily and carefully. If the remote-
' control unit is within about 7 metres of
the CD player-changer, the CD player-
changer can be operated comfortably.
Do not point the remote unit at an an-
gle to the remote sensor because this
will reduce the distance from which you
can control the unit.
:
ome
JVC
1-10(No.20221)
@® CONTINUE
Press this button to select continu-
ous play mode.
When
this button
is pressed, the
CONTINUE
indicator in the PLAY
MODE indicator lights up. -
@ PROGRAM
Press
this
button
to
select
programmed play mode.
When
this
button
is pressed,
the
PROGRAM
indicator in the PLAY
MODE indicator lights up.
@ RANDOM
Press this button for random play.
When
this button
is pressed,
the
RANDOM
indicator in the MULTI-
MODE DISPLAY lights up.
@ EDITING
Press this button
to select edit
recording mode.
Each time this button is pressed, the
[A EDIT] or [P EDIT] indications ap-
pear, in sequence.
@ SIDE AIB
Press this button to select the tape
side, when
programming
for edit
recording.
@ MEMORY
Press
this
button
to
program
selections.
See page 13 for further details.
@ CALL
This
button
is used
to check
programmed data.
While this button
is pressed, the
previously programmed disc, track
and step numbers are indicated in
the display, as from the first step.
@ DISC
Use these buttons to assign the disc
numbers P, 1 to 6.
@ TRACK
This button is used to assign track
numbers (range: 1-99) for a disc either
to be played or programmed, and to
set the edit time.
Whenever
track
numbers
greater
than 10 are to be assigned, use a
combination of the [+ 10] button and
[1] - [10] key numbered buttons.
[For Example]
17 : Press the [+ 10] button and [1] - [10]
key operation number 7.
30 : Press the [+ 10] button twice and
[1] - [10] key operation number 10.
—3—
@ PLAY ( p> )
Press this button to begin play.
@ STOP/CANCEL (.m)
Press this button to stop play.
This button
is pressed when
you
wish
to cancel
the
programmed
selection displayed (see page 14).
@ PAUSE ( tu )
Press this button to stop play tem:
porarily. To restart, press the [PLAY
( » )] button
-
@ AUTO SEARCH
(<< ):Press this button to locate the
start of the current selection, or else
to return to the previous selection
during play.
The track selected will retrace by one
selection each time the button
is
pressed. If the button is held down,
the track selected will retrace by one
selection continuously until the but-
ton Is released.. |
(pp ):Press this button, during play,
to locate the next selection. Holding
it down moves the pickup forward
one selection continuously.
Please Note :
e During
programmed
play mode,
pressing the [AUTO SEARCH (tea,
pp }] buttons selects, respectively,
the previous or next programmed
step.
@ SEARCH
(<< ):Press this button, during play,
to scan backwards. When this button
is held down, the CD player-changer
performs a backward search.
( >> ):Press this button, during play,
to scan forwards. When this button
is held down, the CD player-changer
performs a forward search.
Advertisement
