Philips 28PW9617 Instruction Manual page 30

Digital equipment (DVD, digital Set Top Box,...)
EXTERNAL
1/2/3/4
DIGITAL
AUDIO IN
2 1
DVD
Connect your digital equipment with a eurocable
one of the euroconnectors (
or with a cinch cable to the
of the TV (see illustration above).
For digital sources with a Dolby Digital (AC-3)/MPEG2
audio output also connect an audio cable
socket of your TV to enjoy
DIGITAL AUDIO IN
MultiChannel surround sound.This is only valid when you
have connected your digital equipment to
Other equipment
Other equipment can be connected to one of the remaining euroconnectors.
to
, , or
EXT1 EXT2 EXT3 EXT4
input at the right side
VIDEO
to the
.
EXT1
Press U and
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
J SETUP SETUP
SETUP
J
Digital Sources Digital sources
),
Sound setup
Decoder/Descrambler
Picture tilt
Information line
Factory settings
TV provider
NEX IEW
Auto format
INSTALLATION
Select
Digital sources
INSTALLATION
• if you have no digital source connected,
None
• ,
EXT1 EXT2
equipment to a euroconnector,
•
+ Dig. Audio
EXT1
equipment with a Dolby Digital/MPEG2 audio output to
and to the
EXT1
• , ,
EXT1 2 3
Digital Set Top Box to one of the euroconnectors,
• in case you connected your equipment to the
FRONT
right side of the TV,
Press the
Note: When you have connected a digital source + Digital
audio to
EXT1
Always select
menu.
When you want to watch digital broadcasts via your Set
Top Box, use the
the external where the STB has been connected.
In case of poor digital transmission, select the with the
Multimedia
without changing the picture settings manually.
Connect Peripheral Equipment
at the same time.
none, 0...99
yes/no
in the Setup menu of the
menu and select:
, or if you have connected your
EXT3 EXT4
if you have connected your digital
DIGITAL AUDIO IN
or + if you have connected your
Dig. STB
4
key to switch off all menus.
and a digital STB to one of the other externals
in the Digital sources
Dig. Audio
EXT1 +
key on the remote control, to select
setting using the Smart Picture
socket,
key,
29