Pioneer PD-M400 Operating Instructions Manual page 19

OPERATION (DIRECT PROGRAM, TIMER START)
PROGRAMMING DURING PLAYBACK (Direct
program)
@ When the PGM MEMORY key is pressed during
playback, the currently playing track will be pro-
grammed (Direct program).
@ During playback, select the track number by the
TRACK SEARCH keys. Then press the PGM
MEMORY key. The specified track on the disc
being played will be added to the program.
The indicator will then display (for 5 seconds) the
total number of steps programmed. To program a
track of another disc, press the disc number key
for the disc to be played.
NOTE:
@ Direct programming not available during programmed
playback play or random playback.
About Timer Play Start
When a magazine is properly loaded with discs and
inserted into the player, playback will begin auto-
matically when the power is turned on.
If use is made of an audio timer, the player can be
made to start playing from a specified time.
@ When using a six-disc magazine:
Playback will start from disc 1, track 1.
NOTE:
@ When using an audio timer, leave the POWER switch of
the player turned ON.
@ The timer is activated approximately 5 seconds after the
power is turned on.
.
@ If you operate the player by pressing any of the func-
tion keys before timer start, timer start will not occur.
193
<PRB1048>