Accessories; Before Using For The First Time; Installing And Connecting The Appliance; Commissioning The Appliance - Siemens TI 91 Series Instruction Manual

Rotary selector
The rotary selector 8 has a range of
different functions.
Rotation: navigate in the display and
■
change settings.
Pressing: start beverage preparation
■
or service programme, confirm
menu selection.
Pressing while drink is being
■
dispensed: prematurely stop
dispensing.
_

Accessories

The following accessories are available
A c c e s s o r i e s
from retailers or from customer service:
Accessory
Cleaning tablets
Descaling tablets
Water filter
Care set
Adapter for milk con-
tainers
--------
The contact data for customer service in
all countries can be found at the back of
these instructions.
Order number
Retail Customer ser-
vice
TZ80001 00311807
TZ80002 00576693
TZ70003 00575491
TZ80004 00576330
TZ90008 00577862
K
Before using for the
first time
In this section, you will learn how to
t h e f i r s t t i m e B e f o r e u s i n g f o r
commission your appliance. Before you
can use your new appliance, you must
make some settings.
Only use the appliance in
Note:
frost-free areas. If the appliance was
transported or stored at temperatures
below 0 °C, you must wait for at least 3
hours before using it.
Installing and connecting the
appliance
Remove any protective plastic film.
1.
Place the appliance on a level,
2.
water-resistant surface which can
bear the weight.
Using the mains plug, connect the
3.
appliance to an earthed socket that
has been correctly installed.

Commissioning the appliance

Setting the language
Notes
The language selection appears
■
automatically when the appliance is
switched on for the first time.
You can change the language at any
■
time. ~ "Menu settings"
on page 48
Switch on the appliance with the
1.
on/off button.
The preset language appears in the
display.
Use the rotary selector to select the
2.
desired display language.
Confirm with the right navigation
3.
button.
The setting has been saved.
Accessories en
39