Reversing The Door Swing - Summit MB41B User Manual

Reversing the Door Swing

This refrigerator can have its door open from the left or from the right. By default, the unit is shipped
to you with the door opening from the left side. To change the directions, follow the instructions
below:
NOTE: To avoid damage to the unit, do not tilt the unit more than 45° during this process to avoid
damaging the cooling system.
1. Remove the blind cap (1) and the hinge cover (2).
2. Remove the screws (3), remove the door hinge (4), and lift the unit's door outward.
3. Move the dummy plug (5) of the appliance door to the opposite side. Set the door safely aside.
4. Tilt the device slightly backward and keep it propped up in this position.
5. Remove the door hinge (6) (including the stand) by loosening the screws (7). Then, unscrew the
separate stand (8).
6. Move and secure the door hinge (6) including the stand with the screws (7). Screw in the
separate stand (8) accordingly.
7. Put the device back into the upright position. Put on the device door and fix it in the intended
position. Move and affix the door hinge (4) with the screws (3).
8. Replace the hinge cover (2) and move the blind cap (1) into the exposed hole.
Check that the door is optimally aligned vertically and horizontally to ensure smooth opening and
closing of the door.
NOTE: Some door styles may not be reversible. Consult our website for details
6