Sony Trinitron KV-13VM30 Operating Instructions Manual page 111

Index Function >
INDEX signal marks on the tape let you scan through the start of different programs
or search for a specific section of tape.
Marking INDEX Signals
Automatic INDEX mark
An INDEX signal is automatically marked at the beginning of recording.
ce. cad =
3
Manual INDEX mark
INDEX signals can be marked at any desired point during any recording or normal
playdack.
Oe @
m z = m D
Press INDEX once.
INDEX 00 appears.
C [+)20
INDEX
BACK
SPACE
hy)
wy
vcr
Plus, TIMER ON SCHEEN
Then press MARK at the point where you want to mark INDEX signal. INDEX
MARK appears on the screen.
INDEX MARK
—1> SLOW ——
GC) @
MARK
¢ Leave an interval of more than 2 minutes between INDEX signals when marking them one
after the other so that the VCR can detect them correctly.
¢ While an INDEX signal is being marked during playback, the recorded sound will not be
heard, but it will not be erased. -
¢ You cannot mark an INDEX signal in the following cases:
RM-Y138/W - Ona tape without safety tab.
- Onan unrecorded portion of a tape.
- Immediately before a point on the tape where the tape speed changes.
Chapter 5 : Using Advanced VCR Features
53
uoiaun4 xapul
Buipsooa sawiy 91ND