Sony Trinitron KV-13VM30 Operating Instructions Manual page 110

Quick Timer Recording
52
To extend the Quick Timer Recording
time, press QUICK TIMER REC. to
advance the recording time in 30-minute
increments.
To clear the Quick Timer Recording
setting, press QUICK TIMER REC until
time length is 0:00
If the tape runs out during Quick Timer
Recording, recording will stop and the
power goes off. The tape wilf not réwind
automatically.
If a power interruption occurs during
Quick Timer Recording, recording will
stop and the power goes off. If the power
interruption lasts less than three hours
and the power is restored before the
recording end time, recording will start
again from that point.
This function is convenient when, for example, you want to set the VCR to start
recording immediately without going through the whole timer setting procedure.
* Make sure that the clock is set correctly before you activate Quick Timer Recording.
* During Quick Timer Recording, you cannot change the channel on the VIDEO TV.
1 Insert a cassette. The VIDEO TV automatically turns on.
Press INPUT SELECT so that a channel number appears.
Press TAPE SPEED to select the recording speed, SP or EP.
Select the desired channel number with the 0-9 buttons or CHANNEL +/-.
If you try to select the Cable TV channel, first set CABLE to ON in SET UP
menu.
4 Press QUICK TIMER REC on the front panel.
26
QUICK
TIMER REC
QUICK TIMER
0:00
Each time you press QUICK TIMER REC, the time length advances in 30-
minute increments up to 8 hours.
QUICK
TIMER REC
26
QUICK TIMER
0:30
After you select the desired time length, Quick Timer Recording starts from
that point.
Chapter 5 : Using Advanced VCR Features