Janome 3160QOV Service Manual page 26

Replacing the Electronic Components
Circuit board-A(2)
Setting the Circuit board A
After install the circuit board A, select the appropriate setting of the circuit boad A.
1. Turn the power switch on while simultaneously pressing left cursor button "
" " button.
After the buzzer sounds, press the lcoking stitch button q within 2.5 seconds.
2.
The LCD displays "F", "A" or "d".
3. Press the locking stitch button to select the appropriate setting of the circuit board A:
• Model 3160QDC:
• Model 2030DC, XL601:
• Model 2160QDC, 2160DC, DXL603:
4. Press the start/stop button to determine the setting.
A long buzzer sounds when the setting correctly finished.
5. Turn the power switch off.
w
e
r
Press locking stitch button to select "F" w.
Press locking stitch button to select "A" e.
Press locking stitch button to select "d" r.
Model 3160QDC
Model 2030DC
Model 2160DC
24
" and the right cursor
q