Drawing Up The Lower Thread; Thread Cutter - White 8000 Instruction Book

Drawing up the Lower Thread
Hold the end of the upper
thread with your left hand.
Turn the hand wheel slowly
towards you until the take-up
lever reaches the highest posi
H
on
Pull the upper thread slowly so
that the lower thread will be
brought up in a loop. You
should never pull the upper
thread too hard as this may
bend the needle.
Pull Out both upper and lower
threads to about l5cml6"l and
place them either to the left or
right of the presser foot as
shown
Be careful not to place them
behind the
presser foot as
this may cause jamming prob
lems.
Thread Cutter
On the back of the presser
bar you will find the thread
cutter.
This cutter makes it easy to
cut off the thread at the end
of a searri.
loosen
lower thread
12