Table of Contents
Advertisement
Getting started
The HP-737's lid can be raised and closed like on an acoustic
grand piano. Though this is mainly intended to help you
obtain a better spread of the sound, it also changes the
HP-737's tone color.
There are two positions for the lid: half open and fully open.
Set up the music stand as shown in the figure below.
1. Carefully raise the lid with one hand, taking
care to get a secure grip.
2. Fold out the supporting leg.
Select the small end for the "half raised" position, and
Fold the three supporting feet at the back of the stand and
:
the longer one for the "fully raised" position.
check whether the stand is held in place.
3
Lower the lid until you are sure it is supported
‚ by the leg.
Here's what your HP-737 should look like once the lid is
in place:
Fully raised
Before moving the HP Piano, be sure to lower the music stand as a
safety precaution.
мот
If you аге not sure how to raise the lid, ask your Roland dealer to
show you how it's done.
10
Advertisement
Table of Contents
