Panasonic SC-DK2 Operating Instructions Manual page 26

1
i
Remote control only
GUI (Graphic User Interface) are icons that appear on the TV screen
that allow you to interact with the unit. GUI screens show information
about the unit and discs. You can perform various operations by
changing the information shown in these screens.
1
Press [DISPLAY].
The GUI screen appears•
It changes each time you press the button (see below),
2
= 1 3
TEST
DISPLAY
Press the cursor buttons [4] or [1_] to
select an item.
Press the cursor buttons [A] or [V] to
change the setting.
To clear the GUI screen
Press [DISPLAY] until the original display is restored.
Pressing [RETURN] or [CANCEL] also clears the GUI screen.
For your reference
• Some items require different operations to change the contents, so
refer to the GUI icon descriptions (-, pages 27 and 28) for details.
• The GUI screens disappear after performing some operations,
such as changing the title or chapter.
• If the GUI screen is partially cut off or fails to appear, change the
position with the initial settings, "4 On-Screen Messages"
(m page 54).
RQT53_7
Disc GUI
Unit GUI ,I.
Shuttle GUI _.
-Original display (GUI not displayed)
] Type of GUI screens 1
There are 3 different GUI screens.
Disc GUh You can change the title or chapter, or change the po-
sition by specifying the time.
You can also switch soundtrack, subtitles and angles.
Unit GUI: You can start repeat play or mark a position and
recall it.
You can also turn the CINEMA mode on/off.
Shuttle GUI: You can fast forward, go backward or start stow-motion
play.