Table of Contents
Advertisement
Using Windows Media Player 11
Initializing Disk
Upgrading Firmware for Windows Media Player 11
1. Connect the product to the USB port of your
1. Connect the product to the USB port of your
computer and run Windows Media Player 11.
computer,
2. Select E200, then right-click with your mouse and
select Format. Click OK when a window prompting if
you will continue with initialization appears.
2. Run the iriver Firmware Updater program in the
installation CD, then complete the firmware
upgrade by following the on-screen instructions.
3. A completion message will appear once the
initialization process is completed and your product
will be disconnected from your computer.
= You need to backup all necessary files before initialization, since formatted files
cannot be recovered.
т It is recommended that you use the format feature within the product for formatting,
= Do not disconnect the product from the computer while upgrading the firmware.
40 Other Information
Advertisement
Table of Contents
