IRiver E200 Manual page 13

Connecting
Inserting/Removing the Micro SD Card
1. While the product is off, open the cover at the bottom
of the product and lightly push the Micro SD card into
the slot in the same direction shown in the image.
2. Press the Micro SD card again to remove it.
Insert/remove the Micro SD card while the product Is off.
Do not insert the Micro SD card with force,
This may cause product malfunction and damage to the Micro SD card
Never remove the Micro SD card while in use. This may cause data to be
deleted, product malfunction and damage to the Micro SD card
Do not insert/remove the Micro SD card frequently
if the Micro SD card Is inserted improperly, then the product may malfunction
and the card may be difficult to remove
12 Basic Operations
Recommended Micro SD Card
SanDisk, Transcend
Using a Micro SD card other than the recommended one may cause malfunction
The transfer speed of the Micro SD card may vary depending on your computer.
Formatting the Micro SD Card will delete all data within the card; therefore, itis
important to backup data before formatting,
FAT system for below 4 GB and FAT 32 system for above 4 GB is recommended
when formatting the Micro SD Card,
Try to format the card if the Micro SD Card cannot be recagnized or causes malfunction,
The Micro SD Card |в not included with the product, Please purchase one separately.
A Micro SD Card of 8 GB is recommended for this product.