Table of Contents
Advertisement
CONNECTIONS
Output cable
PD-201/101
Power cord
Control cord
CD-DECK SYNCHRO cord
e
Make sure that all of the components are turned off before
making connections.
CONNECTING THE OUTPUT CABLE:
Connect the LINE OUT jacks of this unit to the input jacks (CD or
AUX) of the amplifier. Make sure that the white plugs are connected
to the left (L) jacks and the red plugs to the right (R) jacks.
@e Besure not to connect this unit to the amplifier's PHONO jacks,
as sound will be distorted and normal playback will not be
possible.
CD-Deck synchro function
lf you have a Pioneer cassette deck provided with the CD-Deck
synchro function, connect the CDeDECK SYNCHRO jacks of the
CD player and cassette
deck.
With this function, synchro
recording can be carried out between player and deck.
e
For details on connections and operation, refer to the Operating
Instructions supplied with the cassette deck.
@ The CD-DECK
SYNCHRO
cord is not supplied with the CD
player.
NOTE:
In order to enable the CD-DECK
SYNCHRO recording function, the
normal output cable must be connected to the stereo amplifier.
Stereo amplifier
Cassette deck
System remote control with a Pioneer stereo
amplifier that has the &@] mark
(Available with the PD-101 and U.S. and Canadian models of the
PD-201 only: Not available with models for military zones (multi-
voltage types))
When
a Pioneer stereo amplifier bearing the
mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the CD
player to be controlled using the remote control unit supplied with
the stereo amplifier. !f you do not plan to use this feature, itis not
necessary to connect CONTROL IN/OUT jacks.
@ The control cord is supplied with the CD player.
e The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause and Track Search.
e@ For instructions regarding connections and operation, refer to
the Operating Instructions provided with your stereo amplifier.
NOTES:
@
When a control cord is connected to the player's CONTROL
IN jack, direct control of the j player with the remote control
unit is not possible.
Operate the player with the remote
control unit by aiming it at the amplifier.
e
Be sure to connect both of the control cord's plugs securely
to the CONTROL
IN and CONTROL
OUT terminals. Do not
connect only one end of the cable.
@
Be sure to turn off the power of the amplifier when connecting
the power cord and output cord.
CONNECTING THE POWER CORD:
Connect the power cord to a household AC wall outlet or an AC
outlet on your amplifier. (See the section "AC power cordconnection
and functions" on page 4.)
@
Make sure plugs are inserted fully into the jacks and wall outlet.
5
<PRB1159>
En
Advertisement
Table of Contents
