Sony TRINITRON KV-27EXR20 Service Manual page 9

To display a window picture — PIP
To swap the main and window pictures — SWAP
PIP VTR
15
1 Set the PIP/VTR selector to PIP.
PIP VTA
{
2 Press PIP.
Input source made or TV channel
for the main picture
PIP
Ca
Input source mode or TV channel
for the window picture
A window picture will appear in the same mode as
the Jast time you used PIP.
Picture-in-Picture aiso functions when the main
picture is in the VIDEO mode.
To make the window picture disappear
Press PIP again.
To scan channels in the window picture
Press CH +/- on the remote commander.
To change the input mode of a window
picture
Press TV/VIDEO on the remote commander. Each
time you press this button, TV, VIDEO 1 or VIDEO 2
mode will be selected in sequence.
Notes on the sub picture
«You cannot hear the sound of the window picture
channel
elf a window picture is blocked, the "BLOCKED"
display will appear on the main screen.
2 Press PIP to display a window picture.
PIP
3 Press SWAP
SWAP. .. VIDEO 1
oC! 6
RM-Y 104
PIP/VTR
PIP
——~ POSITION
FREEZE
To change the position of the window picture — POSITION
1 Set the PIP/VTR selector to PIP.
PIP VTR
ne
2 Press PIP to display a window picture.
PIP
Press POSITION.
Each time POSITION is pressed, the window picture will move
counterclockwise on the screen as illustrated.
PIP