Table of Contents
Advertisement
Use the EAC-66 U/V mixer (not supplied).
1
Prepare the VHF antenna end using the appropriate connector (p. 8).
) Connect the cables to the mixer.
3
Attach the mixer to the VHF/UHF
terminal.
(Rear
of TV)
VHF/UHF
When the U/V mixer is used
Snow and noise may appear in the pictures of the cable TV channels over 37 (W + 1).
Chapter 1: Set up
g
giqeayeuua
~y Bunseuu04
Advertisement
Table of Contents
