Table of Contents
Advertisement
.
Receiving a Muitichannel TV Sound program — MTS
(NOTE: During SAP modes, the sound of non-SAP programs will be muted.)
To listen to stereo sound
Press MTS to select MAIN mode.
The MAIN display will appear on the screen.
The STEREO indicator lamp on the TV will light up whenever a stereo broadcast is
received.
MTS
@
MAIN
Note
A weak incoming signal may cause excessive noise with some stereo broadcasts.
Select MONO
mode to eliminate this noise.
Receiving lifelike sound reproduction — (@) SRS
SAS (Sound Retrieval System) allows you to select the sound mode you prefer. Each
time you press (@) SRS, "(@) SRS [AUTO],"' "(@) SRS [STEREO]," and
"(@) SRS OFF"' modes are selected in sequence.
(@) SRS
€@) SRS [AUTO]
€@>)
SRS [STEREO]
C@) SRS
OFF
Chapter 3: Advanced Operation
33
sainjeay
jnyasn
sayjo
HuiAoluq
Advertisement
Table of Contents
