Table of Contents
Advertisement
8.5 Factory Defaults
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
On/Off
9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
10. PROGRAMMES
10.1 My AEG Care app and additional hidden programmes
My AEG Care app provides you with a wide choice of additional hidden programmes.
Connect the appliance to My AEG Care and you will be able to choose the programme that
suits your needs most.
You can also memorize any of the hidden cycles in the favourite programme
To select the programme from the appliance directly refer to the "Favourite programmes"
paragraph in "Dial and buttons" chapter.
Programme names are subject to change depending on market
requirements without notice.
In the App you can find a complete description of each programme.
Sportswear
Daily Training
Down Jackets
Soccer/Rugby
Skiing Gear
Running Shoes
button.
Bed Linen
Curtains
Pillow
Towels
Duvet
Pet Hair
2. Press and hold the Stains/Prewash
and Time Save buttons for some
seconds.
3. The display will show
about 5 seconds.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
Denim
Silk
Baby
Linen
Business Shirts
Steam Cashmere
ENGLISH
21
for
positions.
Machine Clean
1 Item Fast
Anti-Allergy Vapour
Easy Iron
.
Advertisement
Table of Contents
