Orbi Satellite Overview; Orbi Satellite Hardware Features - NETGEAR RBK762S User Manual

Orbi satellite overview

The following sections are an overview of the Orbi satellite hardware features and LED
behavior.

Orbi satellite hardware features

The following figures shows the Orbi satellite hardware features.
Figure 2. Orbi satellite front and back views
1. Satellite LED: Use the LED on the front of the router to determine its status. For
more information, see Orbi satellite front LED and Power LED behavior on page 11.
2. Sync button: Use the Sync button to connect the satellite to the router.
3. Ethernet ports 1–2: You can connect a LAN device to each of the two Gigabit
Ethernet RJ-45 LAN ports.
4. Power connector: Connect the power adapter that came with your satellite to this
port.
5. Reset button: Use the Reset button to restart (reboot) the satellite or reset the
satellite to its factory default settings:
• Restart the satellite: Press the Reset button for less than five seconds. The Power
LED lights solid amber and the satellite restarts.
• Reset the satellite to its factory default settings: Press and hold the Reset
button until the Power LED starts blinking amber. The satellite resets and returns
to its factory settings.
Overview
Orbi Tri-band Mesh WiFi 6 System
10 User Manual