Table of Contents
Advertisement
uuIndicatorsu
Indicator
Name
Road Departure
Mitigation (RDM)
Indicator
* Not available on all models
90
On/Blinking
Comes on when the RDM system
●
shuts itself off.
*
Comes on if there is a problem
●
with the RDM system.
Indicator may comes on
●
temporarily when the Maximum
Load Limit is exceeded.
Explanation
Stays on - The temperature inside the
●
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
2 Front Sensor Camera P. 526
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off with
a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator and message come back on
after you cleaned the area around the
camera.
2 Front Sensor Camera P. 526
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 431
Stays on constantly - Have your vehicle
●
checked by a dealer.
Message
—
Advertisement
Chapters
Table of Contents
