Indicator
Name
Road Departure
Mitigation (RDM)
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds
●
when you turn the ignition switch
to ON
w
(
*1
, then goes off.
Comes on if there is a problem
●
with the RDM system.
Comes on if the RDM is
●
deactivated temporarily after the
battery has been disconnected,
then re-connected.
Explanation
Stays on constantly - Have your vehicle
●
checked by a dealer.
Drive a short distance at more than 12
●
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
uuIndicatorsu
Message
Continued
89