Eclarations Of Conformity; Type Ktf16 - Brinkmann KTF16 Series Operating Instructions Manual

12 Declarations of conformity
12.1 UK declaration of conformity
Manufacturer
Brinkmann Pumpen, K. H. Brinkmann GmbH & Co. KG
Friedrichstraße 2
D-58791 Werdohl
Germany
This declaration of conformity is issued under the sole responsibility of Brinkmann Pumps and belongs to the
following product.
Product name
Immersion pumps
KTF16...KTF83
Type
The named product described above complies with the following statutory requirements of United Kingdom:
UK SI 2008 No. 1597
UK SI 2016 No. 1091
UK SI 2020 No. 1647
The following designated standards and technical specification have been applied:
EN 809:1998+A1:2009+AC:2010
EN IEC 61000-3-2 :2019
EN IEC 61000-6-3 :2021
Additionally the following standard has been applied:
EN 60034-1 :2010/AC :2010
The instructions contained in the operating manual for installation and start up the pump have to be followed.
Brinkmann Pumpen, K. H. Brinkmann GmbH & Co.
KG
Werdohl, 13.04.2023
...............................................................................................
Dr.-Ing. Dirk Wenderott
Chief Product Officer (CPO)
Head of Engineering
BE5400
UK declaration of conformity
The Supply of Machinery (Safety) Regulations 2008
The Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2020
The following exceptions in accordance with table 1, "Table of exempted appli-
cations" are claimed: No.12 (6a), No.15 (6b)
EN ISO 12100:2010
EN 61000-3-3 :2013+A1 :2019
EN IEC 63000 :2018
Edition
EN 60204-1:2018
EN IEC 61000-6-2 :2019
Dr. H. Abou Dayé
K. H. Brinkmann GmbH & Co. KG
Friedrichstraße 2, D-58791 Werdohl
Representative of documentation
04/2023 Page 9 of 10