Rowenta STEAM 'N PRESS DV86 Series Manual page 6

the iron and its cord out of reach of children less than 8 years
of age when it is energized or cooling down.
• The plug must be removed from the socket outlet before
the water tank is filled with water.
• Do not allow cord to touch hot surfaces. Let Appliance cool
completely down before putting away. Loop cord loosely
around appliance when storing.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface
on which the stand is placed is stable.
• The iron must not be used if it has been dropped, if there
are visible signs of damage or if it is leaking.
• The appliance complies with the technical rules and
standards for safety currently in force (electromagnetic
compatibility, low voltage, environment)
• Check the electrical power for sign and ware or damage prior
to use. If the electrical power is damaged, it must be
replaced at an approuved service center to avoid any
danger.
• WARNING ! The voltage of your electrical installation must
correspond to that of the iron (120V). Connecting to the
wrong voltage may cause irreversible damage to the iron
and will invalidate the guarantee.
The surfaces which are marked or close to with this sign
are very hot during the use of the appliance. Do not
touch these surfaces before the appliance has cooled
down.
SAVE THESE INSTRUCTIONS
3