Assembly - Bush Hog AGR Series Operator's Manual

ASSEMBLY

Your Bush Hog Grapple is fully assembled at the factory. If applicable, make sure all nuts and or bolts are
properly torqued before use of attachment. Refer to "Torque Chart" in the Maintenance Section of this manual.
Light weight tractors and some skid steer loaders will require rear ballast for heavy loads to
maintain steering control. Be sure to consult your Skid Steer or Tractor Operator's Manual to
determine whether or not to add ballast.
AGR-BGR-BRGR 08/22
© 2022 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-2