Advertisement
CT-S520, CT-S420
11.
PANEL FACILITIES
=
rT
2
i
2
@ The illustration
shows CT-S520.
®@
Oo
®
@®O
@ POWER
STANDBY/ON
switch and STANDBY
indica-
tor
The POWER switch activates the secondary transformer only.
Even when the switch is in the STANDBY position, there will be
a power flow to the deck's circuits as long as the power cord is
connected to a power outlet.
@ TIMER
mode/repeat
play switch (TIMER REC/OFF/
PLAY-REPEAT)
@ MPX FILTER button
@ Display off button (DISP OFF)
Press to turn the function display on and off.
® Level meter range selector button
Press to select wide or expanded range on the level meter.
© Remote sensor window (CT-S520 only)
@® Function display
Dolby* NR button (DOLBY NR OFF/B/C)
*
*
Dolby
noise
reduction
and
HX
Pro
headroom
extension
manufactured under license from Dolby Laboratories Licensing
Corporation. HX Pro originated by Bang & Olufsen.
*
"DOLBY"; the double-D symbol
DU and "HX PRO" are trade-
marks of Dolby Laboratories Licensing Corporation.
@® Tape counter mode button (COUNTER MODE)
@ Counter reset/tape capacity selector button (COUNTER
RESET/TAPE CAPA)
@ SOUND EO button (CT-S520 only)
@ FLEX (1/f) button
® Operation buttons
4<4/MS_
: Rewind/music search
a
: Stop
>»
: When pressed during stop, begins playback.
hP/MS_
: Fast forward/music search
e
: Recording
iL}
: When pressed during playback or recording, pauses
playback or recording. When pressed during pause,
resumes play or starts recording.
Oo
: Recording mute
@ Recording level control (REC LEVEL)
® Recording balance control (REC BALANCE)
@® SUPER AUTO
BLE START/CLEAR
button
32
®
80O080
@ Headphones jack (PHONES)
@ CD-DECK
SYNCHRO
recording
button
(CD
SYN-
CHRO)
@® Monitor selector button (MONITOR)
Used to monitor the source sound or just recorded source dur-
ing recording.
@ When the unit is set to record or playback mode, the TAPE
indicator light up and the monitor mode is automatically se-
lected.
@ OPEN/CLOSE button (CT-S520)
If the tape is moving (recording), press the stop (Ml) button be-
fore pressing this button.
If this button is pressed when the unit is in standby mode, the
cassette door opens and the function display is turned on auto-
matically.
@ Eject button (4) (CT-S420)
@
If the tape is moving (recording, playback, tape winding,
etc.), press the stop (Ml) button before pressing this button.
Advertisement
