Fcc Compliance - Philips sonicare DiamondClean Smart Manual

8
English
Storage and transportation conditions
Electromagnetic fields (EMF)

FCC Compliance

- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than usual,
stop using and charging the product and contact
Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle the
product or battery to prevent batteries from heating
up or releasing toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge batteries.
- This appliance contains batteries that are non-
replaceable. When the battery is at end of life, the
appliance shall be properly disposed of, see section on
Recycling.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
- When you handle batteries, make sure that your
hands, the product and the batteries are dry.
- To avoid accidental short-circuiting of batteries after
removal, do not let battery terminals come into
contact with metal object (e.g. coins, hairpins, rings).
Do not wrap batteries in aluminium foil. Tape battery
terminals or put batteries in a plastic bag before you
discard them.
Temperature -10°C to +60°C (14 °F to 140 °F).
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Changes or modifications not expressly approved by
Philips could void the user's FCC authorization to operate
the toothbrush.
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device