Philips sonicare DiamondClean Smart Manual page 23

Cleaning
Toothbrush handle
Brush head
Charger
Travel case
Charging travel case
Storage
1 Remove the brush head and rinse the metal shaft area
with warm water. Make sure you remove any residual
toothpaste.
Caution: Do not push on the rubber seal on the metal
shaft with sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp
cloth.
Note: Do not tap the handle on the sink to remove excess
water.
1 Rinse the brush head and bristles after each use.
2 Remove the brush head from the handle and rinse the
brush head connection with warm water at least once
a week. Rinse the travel cap as often as needed.
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth.
Rinse with warm water and use a damp cloth to clean
inside of travel case.
1 Unplug the charging travel case before cleaning.
2 Use damp cloth to wipe the surface of the travel case.
If you are not going to use the product for an extended
period of time, unplug it from the electrical outlet, clean
it and store it in a cool and dry place away from direct
sunlight.
23
English